After the installation shower room, remember to do a good job - installation acceptance

The choose and buy the shower house, for the installation time is need to be pay attention to link. Shower room is not like a toilet, faucet, such as standard products, at the time of installation, even if not been rigorous professional training can be carried out in accordance with the installation instructions to install. When shower room to consumers in the home, not installed at best a semi-finished products, at this moment need a trained teacher to correct installation can into normal use. If the installation master unprofessional, shower room after installation or defect, so late will seriously affect the use and security. So after the installation in the shower room, acceptance must be installed. Shower room installation acceptance generally there are a few basic criteria: first, whether the door switch smoothly: pay attention to the parallel switch does not sway live categories, sliding smooth move category should pay attention to not sway. Second, the door is closed under natural switch state completely: magnetic not too high, it is best to a tiny gap natural closed best, door magnetic stripe strong suction when closed. Third, natural vertical degree of glass: general good regulating function of shower room after debugging basic will not pose a safety hazard, unless it is improper use. （ 1 - are allowed 3 cm error, because there may be the ground level and vertical metope have error) And so on. （ 1) Epitaxial degrees whether level off, that is, at the bottom of the shower room lishi edge distance should be consistent. （ 2) Flatness, namely the shower room door and fixed glass on top of the highly consistent. （ 3) Smooth degree, namely the push-pull or no noise when opening the door, shower room comfortable. （ 4) Integrity, namely the shower room after the installation, all of the screw slots have a decorative cover, such as fixed and relies on a wall at the bottom of the glass side strip are protected.