Shower room of toughened glass is glass of choose and buy is not as thick as possible -

Shower room glass thickness, and its robustness nature is strong, but if too thick, also be counterproductive, because the thickness of glass on a little more than 8 mm brand shower room factory is very difficult to achieve full toughened, so once the glass is broken, and will have sharp surface, thus prone to cut the risk of the human body. Because of the thicker the glass, its thermal conductivity will become bad, so the greater the possibility of glass bursting, because glass from a major cause of the explosion is caused by uneven cooling in different region, so from this point of the flameproof glass should be as thin as possible. Glass, the more quantity is heavier, heavy pressure is too great for hinge, profiles and the service life of the pulley will be cut short, especially cheap shower room mostly use poorer quality of pulley, so that the thicker the glass instead of the more dangerous! And toughened glass is good or bad depending on whether the toughened degree, formal metal production, light transmittance, impact resistance, heat resistance and so on. The thicker the glass, the better is a myth. General in the market of all claims to be toughened glass shower room, subtle differences in the extent of the toughened, good full toughened glass that is, almost alone less than hundred of toughened, on the market for more than 8 mm generally cannot reach the 100% of the toughened glass. Consumer after ordering, can pay attention to the 3 c certification marks, regardless of the size of toughened glass, the above shall be plastered with 3 c authentication marks, can be known from this detail is toughened glass. Shower room when consumer choose and buy should choose regular professional brand, carefully check whether the producer name and address and certificate of approval, normal manufacturer of product quality and the construction process more secure.