欢迎加入阿波洛浴盆-世界领先的卫浴整体解决方案品牌

Glass shower room is actually more thick? -

by:Appollo bath     2021-04-14
Now a lot of consumers will consultation: how thick is the glass shower room right? The thicker the glass, the better? Here is to know about the glass of shower room together related knowledge! Unqualified toughened glass damage the thicker the glass, its thermal performance will be worse, so the possibility of glass blow itself up will be very big. Because glass explosive one of the reasons is due to uneven cooling of the local, therefore, from this point of view, the glass is the thinner the better. The thicker the glass, the more its robustness is strong, but if too thick, it will be hard to completely tempered. If the thickness more than 8 mm, on a little brand manufacturers made of toughened glass shower room is very difficult to achieve full toughened, so, in case of broken glass, there will be a sharp surface, easy to cause danger to human body. So we should choose the shower room with some big brand manufacturers, such as the safety factor of toughened glass is very high, use at ease. Qualified toughened glass shower room, in the market are self-proclaimed is tempered glass. Not nearly as long as toughened glass, hundred of toughened, also is not a qualified toughened glass. So at the time of purchase, should pay attention to whether have meet the national standards. The thicker the glass shower room will be heavier, the hinge of the pressure will increase, profiles and the service life of the pulley will be cut short, if you are using cheap shower room, then its pulley is poor quality, and the thicker the glass instead of the more dangerous! ! ! ! Toughened glass depends on the quality of steel, whether normal manufacturer production, impact resistance, heat resistance, light transmittance and so on, so 'the thicker the glass, the more' is a myth. Glass thickness of common shower room has shower room and linear half arc, and the two different shapes of the thickness of the glass of shower room requirements are not the same. Modelling of shower room is half arc, for example, if a requirement, the thickness of the glass generally advisable, 6 mm is too thick for modelling, and good stability is less than 6 mm. If you choose straight shower room, glass thickness can choose to 8 mm, can also choose to 10 mm. Note, however, with the increase of the thickness of the glass shower room, the whole weight will increase, that means the quality of the hardware accessories will be better. Want to know more information about shower room glass, please click on the maintenance of shower room glass five points, be short of one cannot. 》
Custom message
Chat Online
Chat Online
Leave Your Message inputting...