Installing a shower want solid border what steps should do well? -

Ordinary is a separate shower room comfortable bathing environment, is also a completely exclusive space that wash bath. After the choose and buy the common shower room, started for installation work, how should we fixed framework? Definition will be made by below small make up to you. Use tape + pen locate drilling common shower room to install the first step is to identify the location of the hole and punching, then fixed frame shower room. Find a punching, need more tools, the operation is more complicated, if don't know much about this aspect can ask professional master to measure the door installation, installation. Shower room must be conducted before using fixed, fixed method is commonly with screws, wall hole on aluminum alloy frame generally need to reserve in advance, the position of the corresponding is the tag corresponds to the position of the wall. Method is to stick the border on the wall, with a tape measure to ensure the correct position, and then use a pencil to mark on the wall. Use tools for drilling work set the location of shower room, the next step is to punch. Punching is divided into two steps. First of all, with a circular hole drill in drilling a shallow hole on the wall, because the bathroom metope is decorated with ceramic tile is hard, in order to make it easier for drilling, the bit wet cut can be more convenient. In addition, punch, also can pour some water when punching, after all holes, shallow hole had been punched on the basis of call a deep hole. Use hammer installation of colloidal particles before pushing screw into the wall, you first need to install the expansion rubber particles in the hole, rubber particles can better tighten bolts, the only need to use the rubber hammer to knock into the hole. Electric screw fixed frame after completing the above steps, the installation of the shower room frame can be made, will be placed at the bottom of the frame on the water barrier, and then fixed framework. Method is to use the electric screwdriver to screw with a fixed frame on the wall.