Dry sharing: aluminum alloy - the correct maintenance of shower room way

In addition to the stainless steel, aluminum alloy frame is current the main material of main body frame, so at the time of shower room maintenance, to distinguish between stainless steel and aluminum alloy shower room of shower room maintenance way. So, below small make up around this topic to introduce for everybody maintain the method of aluminium alloy shower room! Aluminum alloy shower room maintenance method: 1, the location of the installation to avoid direct sunlight and exposure, otherwise easily lead to coating layer fade; 2, do not use corrosive liquid to wipe; 3, do not use coarse material, such as toothpaste to wipe; 4, do not use sharp objects to depict the surface, if the surface of the stain, use a neutral detergent to wash clean again after melt water wipe; Aluminum alloy shower room hardware accessories maintenance: shower door, sliding door type on the market the most common for two ways of the sliding block and sliding wheel. Pulley, slider at the time of daily use, try to avoid the collision force activities below door, door to avoid activities will fall off; On a regular basis to clean slide rail, pulley, slider work, filling lubricant, lubricating oil and lubricating wax; Regularly check and adjust the slider of the adjusting screw, ensure the slider to activity keeps a good bearing and sliding door. Note: when using the bathroom special detergent, please be sure to properly according to the considerations of the instructions on the container. The wrong method of use will knot a harmful effect on the human body, and easy to make the product appear some bad situation. Do not use to clean out the following items: acidic, alkaline solution, drugs ( Such as hydrochloric acid) , acetone thinner solvents, such as household cleanser, etc. , otherwise will have bad effect to human body, and cause products appear some bad situation.