How to correctly use shower room to prevent from exploding accident happened? -

Although the shower room is big, but its explosive issue is also being focused on by people. Due to the shower room began to gradually accepted as families, many of the owners are willing to decorate in the bath when installing a shower room products, is also for this reason, people particularly concerned about the safety problem. There are many reports about shower room since the explosion accident caused panic, the shower room is a love-hate relationship, we should know how to correctly use shower room can effectively prevent the shower room. Believe that many of you know, even if is to use toughened glass shower room, but there is still a three over one thousand of the explosive rate, even if again low probability for safety should also be word seriously, so we shower room when the choose and buy should pay attention to these three points: 1, the shower room of choose and buy, pay attention to whether or not it with 3 c authentication marks, to use laser print directly on the glass surface is preferred; 2, the thickness of the tempered glass generally use 4 mm, 6 mm, 8 mm and 10 mm specification, but in general use - 6 mm 8 mm is more appropriate, neither too thin or too thick does not necessarily appear useful; 3, before installing the shower room, must first check the glass edge whether have damage, and chamfering edge grinding processing whether level off, or glass problems after installation will cause the risk happens. In addition, we also can through the following measures to prevent explosion shower room: 1, do not suddenly temperature is too high, suggested that slowly raise the water temperature of shower room is a semi-enclosed space, so the high temperature and high pressure accumulation to a certain extent will be to glass screen to form a larger pressure, resulting in uneven glass is heated, to bring about blowout of toughened glass. So, it is suggested that everyone in the bath, don't put the hot water temperature increase too much, try to increase the water temperature slowly, make the uniform temperature distribution of shower room, this can effectively avoid the use of the time since the explosion accident of shower room. 2, try to avoid collision, light on slow off although toughened glass strength is higher, if even a few people are no problem when testing. But, toughened glass, although hard, but more afraid than common glass sharp objects, the principle of the bus and escape glass is the same. In addition, the wall will affect the safety of toughened glass, in this case if again by the collision will be extremely easy to cause explosion as a whole. We were opening and closing of shower room, do not force too much, we all know, shower room at the time of installation, its all around metope are fixed, if too much will make the shower room glass edge stress caused by explosion, toughened glass belongs to brittle material, so they will fear the edge stress. 3, for garment 'on the shower room, getting rid of the shower room explosive threat we can put a layer of toughened glass quality safety explosion-proof membrane, and can improve the strength of glass at least more than 6 times, even since the explosion accident, can also through the role of the viscous force explosion-proof membrane glass pieces glued together after the explosive, it can avoid the shower room splinters caused by explosive and hurt, can have the effect of safety protection.