How to effectively reduce the explosive potential of shower room? -

Explosive is one of the toughened glass has the features of, given the current level of production technology, make the explosion-proof use toughened glass shower room there is three over one thousand of the explosive rate, so how to reduce the explosive risk shower room? 1, slowly raise the temperature inside shower room is a closed space, high temperature and high pressure accumulation to a certain extent for glass formation pressure, lead to uneven heating glass, easier to bring about blowout of toughened glass. Therefore, it is suggested that everyone in the bath, don't suddenly use hot water temperature too high. 2, try to avoid collision avoid collisions, light should slow down. Wall will affect the safety of toughened glass, if it is caused extremely easily by the collision explosion as a whole. 3, replacement of tempered laminated glass can ask when buying businesses will ordinary tempered glass replacement for tempered laminated glass. Laminated glass is made of PFVB film will be two pieces of high temperature adhesive toughened glass, the strength of glass can be increased more than 5 times. Even burst, the film of the viscous force effect of the explosive glass pieces glued together, also can prevent glass splinters caused by glass explosive injury, take the action of safe protection. 4, with explosion-proof membrane will not bring on general glass explosion-proof membrane, diy with explosion-proof membrane can prevent the glass fragments from exploding flying about. Choose as far as possible when use explosion-proof membrane, through the international association of diaphragm certification, to have qualified explosion-proof membrane production safety film. 5, avoid sharp objects scratching toughened glass strength is very high, even can withstand the weight of a few people. But it's Achilles heel is afraid of being sharp objects and impact. Even slight impact, but as long as sharp objects impact of toughened glass, can make the glass at this point has been a lot of outside forces and to produce a slight craze. But a little bit of crack means that the stress distribution within the whole piece of glass, all the damage to countless spider mesh cracks in a flash.